The Latest Introduction Of Three Types Of Artificial Leather Fabrics

Jun 13, 2025

Leave a message

Faux leather has always been a darling in the design world, and products with leather often enter the market with a high-end, luxurious label, and are also loved by people who are looking for quality.
What kind of material is artificial leather made of?
Natural leather has the following characteristics: dense and porous, moisture-absorbing and perspiration-wicking, good toughness, wear-resistant and cold-resistant, durable and durable, easy to clean, and looks very high-end. There are also many disadvantages, such as its physical properties are relatively poor, thick and uneven, not alkali resistant, and expensive, and resources are limited, the utilization rate is low, the production process is not environmentally friendly, and the process will contain harmful substances such as chromium and formaldehyde.
However, with the deterioration of the living environment, human beings continue to forcibly occupy the living space of animals. Based on the scarcity of natural resources and the needs of animal protection, it is inevitable to replace natural leather with synthetic materials and realize the direction of imitating leather color, material texture and surface texture.
The global market is actively developing environmentally friendly imitation leather, which is mainly used in footwear, furniture, sofas and bags, vehicle and ship interiors, clothing fabrics, handbags, craft decorative fabrics and military supplies.
The artificial leather production materials used in the market are mainly composed of two parts.
The lower part of the figure is the base cloth used in leather, which is generally made of woven, knitted, woven, non-woven and other materials;
The upper part is the surface layer, which is mainly coated with PVC or PU resin or other materials on the base cloth to form an artificial leather surface.
Let's take a look at what types of artificial leather are available on the market.


01. Microfiber leather
Microfiber leather should first achieve microfiber (skeleton material) that is similar to the structure and performance of bundled collagen fibers in natural leather; Secondly, the nonwoven fabric process with three-dimensional network structure (needle punch or spunlace method) should be adopted; Finally, it is processed with PU resin with excellent refilling performance, microporous structure and high toughness.
So microfiber leather is usually divided into two parts of the material: microfiber and artificial leather.
The first is microfiber (microfiber). The source of fiber ultra-fine research can be traced back to the 40s of the 20th century, and the first company to use synthetic fibers to successfully industrialize composite fibers was DuPont in the United States. During 1962~1965, Japan's Toray, Kaneso, Teijin, Kuraray and other companies successfully used their own methods to successfully manufacture microfibers with different characteristics, such as multi-core type, wood grain type, radial type, hollow radiation type and other composite fibers were developed.
In the late 70s of the 20th century, Toray was inspired to develop a very homogeneous fiber technology by analyzing natural fibers. After the 80s, microfiber became popular with consumers, forming an artificial suede craze.
After the 90s of the last century, many international companies have launched polyester, polyamide, polyacrylonitrile and polypropylene and other filament fibers. At the same time, there were also terms such as "fine denier fiber", "microfiber", "microfiber", etc., and later, the Japanese chemical fiber industry generally called the fiber with a monofilament linear density of less than 0.3dtex as microfiber, which was also accepted by many companies in the industry.
Because microfibers are thinner than conventional fibers, they have a fluffier and softer feel than ordinary fibers. And it can overcome the shortcomings of natural fibers that are easy to wrinkle and man-made fibers are not breathable.
In addition, it has many irreplaceable excellent characteristics such as warmth, no mold, no moth, light weight, waterproof and even water absorption.
(1) Orange fissile fibers
Orange split fiber is composed of two components, generally 4, 8, 16, 32 petals, etc., the quality of domestic split filament is relatively stable, the yield is also very high, the current split short fiber our country Guangdong Province has production, but the quality and foreign countries are still very far behind.
(2) Island fiber
Currently, there are two ways to produce island microfiber.
One is the island method: it is made by two-component composite spinning technology, which exists in a separate form in front of the spinning distribution plate, each going its own pipe, and the cross-section of its fiber is a component in a fine and dispersed state, surrounded by another component, much like an island in the sea, and its island and sea components are continuously dense and evenly distributed in the length direction of the fiber.
The number of islands is fixed, uniform and regular, and the titer is consistent and can reach 0.04d. After spinning, it exists in conventional titer, and only when the sea component is dissolved with solvent in post-processing, can the bundle-like microfiber bundle be really obtained, which is currently used in filament more.
The second is the adventitious island method: it is made by two-component miscible spinning technology, and the cross-section of its fiber is also surrounded by another component in a fine and dispersed state, and the island in its single fiber is microscopically uncontrollable, and it is discontinuous and densely distributed in the length direction of the fiber. Since the island part is stretched to form very fine fibers, it is not yet possible to produce filament yarns, but only staple fibers.
The islands of island fibers are generally made of polyester (PET), polyamide (PA), polyacrylonitrile (PAN), etc.; Sea components can be polyethylene (PE), polyamide (nylon 6 or nylon 66), polypropylene (PP), polyvinyl alcohol (PVA), polystyrene (PS), and acrylate copolymers or modified polyesters (COPET).
The other part is the artificial leather part, and the development process of artificial leather has undergone 5 major technological changes.
The first generation of leather technology is woven cloth coated with polyvinyl chloride resin, commonly known as artificial leather; The second generation of leather technology is the coating of polyurethane with warp knitted fabric; The third generation of leather technology is ordinary staple fiber nonwovens coated with polyurethane, collectively known as synthetic leather.
The fourth generation is the use of indefinite island staple fiber nonwoven base cloth impregnated polyurethane, collectively known as microfiber skin.
Dingdao microfiber leather, belongs to the fifth generation of artificial leather, its production technology is complex, high cost, processing difficulty, across four industrial fields and related specialized technology: island staple fiber production technology, non-woven base fabric production technology, leather manufacturing technology and microfiber leather dyeing and finishing processing technology.
Each of the above-mentioned production links should take corresponding measures and technical means according to the characteristics of island staple fiber. Only in this way can the microfiber leather produced achieve the effect of imitating natural leather.

 

02.PVC artificial leather
PVC artificial leather is the original commonly used alternative to natural leather, which is still widely used today due to its low price and simple process. The research and development direction of PVC artificial leather is mainly to improve the physical properties of PVC artificial leather, so that it has excellent processing performance and physical and mechanical properties.
PVC artificial leather generally uses woven fabrics and knitted fabrics as the base, and now there are also non-woven materials as the base, which is generally used in ordinary leather such as shoe materials, bags, clothing and furniture. PVC artificial leather also has many defects such as hard feel, poor leather feel, poor comfort, poor aging resistance, cold resistance, and non-breathability.

 

03. Ordinary PU synthetic leather
Due to a series of defects of PVC artificial leather, PU synthetic leather has replaced part of the application of PVC artificial leather. PU synthetic leather has generally covered the fields involved in natural leather and has become the main material to replace natural leather.
PU synthetic leather is generally divided into dry PU leather, wet and dry PU leather, PU leather (space leather) of non-woven base cloth, high-density PU leather, imitation microfiber, semi-microfiber leather, etc.
The current situation of artificial leather applications
Generally speaking, foreign countries do not consider the authenticity of leather, but mainly consider the performance of leather. Due to the unique environmental protection and physical properties of microfiber leather, microfiber leather has been widely used in foreign countries.
At present, the actual situation in China is that people generally have insufficient understanding of microfiber leather and think that microfiber
Leather is an unnatural product, and ordinary leather into a field, has not yet recognized its excellent performance, so its application is limited, not to the extent of universal application abroad.
However, with the continuous efforts of microfiber leather manufacturers, it has basically reached the recognition of most people in the field of footwear materials, and now, more and more microfiber leather is accepted in various fields, such as car interiors and protective covers for digital consumer goods.

Send Inquiry
Send your inquiry

Please send us your request and we will reply to you as soon as possible.

Contact now!