Artificial leather is a kind of plastic products with beautiful appearance and leather feeling, which can be replaced. It is generally made of fabrics, coatings, synthetic resins, and various plastics. It can also be mixed and heated with resin and other ingredients, and then pressed into cloth-lined or unlined products through a roller. After that, the roller can be flattened or embossed to make products of various colors and patterns. So how many production methods are there for foamed artificial leather?
How many production methods are there for foamed artificial leather?
1. Direct coating method, after pretreatment, the glue is directly coated on the base cloth with a scraper, and then put into the plasticizer box for gel plasticization, and then through embossing, cooling and other processes to obtain the finished product.
2. The transfer coating method is also known as the indirect coating method. Paste the paste on the carrier (leaving the paper tape or stainless steel tape) with a reverse roller or scraper, and after gelling, the cloth base is compounded into a gel layer under tension, and then plasticized, cooled, peeled off from the carrier, and then post-processed, that is, the finished product.
3. Calendering viscosity method, according to the requirements of the formula, measure resin, plasticizer and other compounding agents, put them into the kneading machine and mix them evenly, and then send them to the three-roll calender or four-roll calender through the internal mixer, refining machine or extruder. This method can be used to produce artificial leather from a variety of different base fabrics.
4. Extrusion sticking method, the resin, plasticizer and other adhesives are evenly mixed, and the extruder extrudes into a film layer with a certain thickness, width and width, and then preheats the base cloth on the three-roll molding machine for bonding, and then preheats, laminates, embosses and cools the finished product. This method is used for thick products such as floor leather and conveyor belts.
